Specifications
Maximum Frame Size37 3/4” x 95 3/4” OXXO
Maximum Panel Size34 1/4” x 93”
ConfigurationsX, XX, OX, OXO, OXXO
Maximum Design Pressure (see product approval)86 PSF
Glass Thickness5/16” and 7/16”
Glass ComponentsPer Notice of Acceptance
MuntinProfile Exterior/Flat Interior
Frame ColorWhite,Bronze
Frame Depth4 1/2”
Miami-Dade County NOAReference Below

divider

General Information
French doors shall be “La Porte” as manufactured by Lawson Industries, Inc., 8501 NW 90 Street, Medley, Florida 33166, USA.

divider

General Information
Extrusion shall be 6063 aluminum in T5 and T6 temper., with walls of from.084”to .125”nominal thickness at all structural locations. Frame jamb shall be tubular shaped. Head, jamb and sill shall have a dimension of 1 3/4”x 4 1/2”. Frame shall be assembled by securing head and sill to jambs using eight concealed sheet metal screws. Panels shall be assembled using a 5/16”diameter, continuously threaded steel rod, running through top and bottom rail from stile to stile. Each rod end shall be held firmly with washer hex nuts. Sill shall have an overall height of 2 1/8”and contain a 1 1/4”step for panel rail to seat. Exterior face of rail shall finish flush with outside edge of sill. Door shall be exterior swing, providing the best possible protection against water infiltration. Frame head shall contain integral hood projecting out from header to deflect clinging water from running directly down head and into opening at top of panel.

divider

General Information
Door panels, jambs and header shall receive an electro-statically applied 1.0mil thick dry film coating which meets the performance requirements of A.A.M.A.603.5 in a choice of bronze or white. All sills shall be mill finish.

divider

General Information
Active door stile shall be routed for 21/8”diameter dead bolt and latch with 23/8”backset. Concealed face of inactive leaf shall contain top and bottom flush bolts with stainless steel shaft to engage into header and sill, preventing inactive leaf from opening when bolts are engaged. Two heavy-duty extruded aluminum hinges with stainless steel hinge pin shall support each door leaf.

divider

General Information
Muntins shall be adhesive applied to interior and exterior surface of each panel and sidelite. Configuration shall be flat 1 1/4”interior bar and profile rise exterior extrusion.

divider

General Information
All stiles and rails shall be weathered using a combination of a flexible virgin PVC bulb and polypropylene pile. Weather-stripping shall be so placed as to provide two points of protection in all vertical locations, and four points of protection in all horizontal locations.

divider

General Information
As added option a combination of a low profile sill and single action latch allows for wheel chair egress/ingress and ease of operation latch.

divider

General Information
Panels shall be glazed with 5/16” thick laminated glass consisting of one lite of1/8”annealed glass on inboard and outboard separated by a .090” thick interlayer as standard. Optimal 7/6” thick laminated glass consisting of one lite of 3/16” thick annealed glass on inboard and outboard side of.090” interlayer is available as added option. Glass color is as specified. Both vertical stiles and horizontal rails are assembled consisting of base extrusion and a snap fitted aluminum quarter-round glazing adapter applied to the exterior side of each panel member to conceal and protect the glazing pocket. Heat strengthened glass is added option.

divider

General Information
Panels shall be glazed with 5/16” thick laminated glass consisting of one lite of 1/8”annealed glass on inboard and outboard separated by a .090” thick interlayer as standard. Optimal 7/6” thick laminated glass consisting of one lite of 3/16” thick annealed glass on inboard and outboard side of.090” interlayer is available as added option. Glass color is as specified. Both vertical stiles and horizontal rails are assembled consisting of base extrusion and a snap fitted aluminum quarter-round glazing adaptor applied to the exterior side of each panel member to conceal and protect the glazing pocket. Heat strengthened glass is added option.

Technical
Details Maximum Frame Size 145 1/2” x 95 3/4” OXXO Maximum Panel Size 34 1/4” x 93” Configurations X, XX, OX, OXO, OXXO Maximum Design Pressure (see product approval) 86 PSF Glass Thickness 5/16” and 7/16” Glass Components Per Notice of Acceptance Muntin Profile Exterior/Flat Interior Frame Color White,Bronze Frame Depth 4 1/2” Miami-Dade County NOA Reference Below
Profile Material Type – T6063 Aluminum power coated Interlocking slats / blades Insulation – None Brand – Maximum Shutters, USA Country of origin – USA Gauge – 0.52mm blades - .062mm knuckles
Benefits Miami-Dade (HVHZ) FBC Hurricane Approved 85% noise reduction 12% cooler in summer 15% warmer in winter 98% light block out 35% energy efficient Eliminates condensation Reduces glare Rust prevention medium 65% components aluminium
Suitability Extreme High risk areas for hurricane, storm, or security issues Excessive noise areas Protection against heat, cold Very high protection for windy areas Acceptable for Peninsula seafronts Fire Protection and Thermal Control Internal or external installation
Applications Doors Doorways Windows Bars Roof windows Canteens Pergolas Verandas Cabanas Bay Windows Garden Windows Curved Windows Atrium Patios Closets Cupboards Partitioning Areas

Write a review

Please login or register to review

Single French / Cabana Impact Door 2200 Lawson

  • Brands Lawson Industries
  • Product Code: FID-X-2200
  • Reward Points: 25
  • Availability: In Stock
  • $48.49

  • Price in reward points: 50

Available Options


Tags: French Impact Door